Shell Launches Naturelle S4 Stern Tube Fluid 100 To Meet Revised US EPA Regulations
Shell has launched its new range of Environmentally Acceptable Lubricants (EALs), including Shell Naturelle S4 Stern Tube Fluid 100. The Shell Naturelle range of products enables ships entering US waters to comply with the revised 2013 Vessel General Permit (VGP).
Shell Naturelle S4 Stern Tube Fluid 100 is made with fully saturated ester base oil, which offers the best resistance to hydrolysis (breakdown by water) and oxidation (oil ageing). It is also a non-emulsifying fluid, which allows ship operators to easily drain any water from the stern tube system, preventing hydrolysis and biodegradation of the oil within the equipment.
What sets Shell Naturelle S4 Stern Tube Fluid 100 apart from the competition is the wide range of approvals it has received from stern tube original equipment manufacturers (OEMs), like Aegir -Marine, Blohm & Voss (SKF), Kemel and Wärtsillä Propulsion.
In addition, Shell has also launched its VGP-compliant range of gear oils, hydraulic oils, wire rope lubricant and greases, almost all of which has received EU Eco Label certification and a host of approvals from top original equipment OEMs.
“We are delighted to introduce our new Shell Naturelle range of EALs and give our customers the peace of mind that they can comply with these regulations when they enter US waters. We have also taken the choice to use the best available technology to better protect our customers’ equipment,” said Jan Toschka, General Manager of Shell Marine Products.
Notes to Editors:
Shell’s Naturelle range of VGP-compliant products is available in major ports across Shell’s global network.
The 2013 revised VGP impacts all commercial vessels longer than 79 feet and requires the use of EALs for all applications with a possible oil-to-sea interface unless technically infeasible. Affected applications include stern tubes, rudder bearings, controllable pitch propellers, stabilisers, thrusters, wire ropes and cables.
The intent of this new requirement is to reduce the environmental impact of lubricant discharges on the aquatic ecosystem by increasing the use of environmentally acceptable lubricants for vessels operating in waters of the United States.
The areas covered by the VGP includes all waters within three nautical miles of US coastlines, including Puerto Rico, Guam, American Samoa, the Virgin Islands, the Commonwealth of Northern Mariana Islands and the Trust Territory of the Pacific Islands; and in the Great Lakes.
Shell Naturelle is a range of lubricants that have been specially developed to be environmentally considerate, used in environmentally sensitive areas such as inland waterways, flood defences, forests, ski slopes and mining sites. Typically, these are found in industry sectors such as mining, construction (tunnelling), pulp & paper (forestry), railways, agriculture and marine.
ENQUIRIES:
Shell Marine Products Global:
Oliver Lim
+ 65 9727 8960
[email protected]
ABOUT SHELL MARINE PRODUCTS
Shell provides lubricants for the marine industry through its Shell Marine Products business. It serves over 10,000 vessels, ranging from large ocean-going tankers to small fishing boats in over 500 ports across 40 countries. The advice and technical services we provide help our customers achieve maximum value from using our lubricant products across all types of machinery and equipment on a ship.
CAUTIONARY NOTE
The companies in which Royal Dutch Shell plc directly and indirectly owns investments are separate entities. In this press release “Shell”, “Shell group” and “Royal Dutch Shell” are sometimes used for convenience where references are made to Royal Dutch Shell plc and its subsidiaries in general. Likewise, the words “we”, “us” and “our” are also used to refer to subsidiaries in general or to those who work for them. These expressions are also used where no useful purpose is served by identifying the particular company or companies. ‘‘Subsidiaries’’, “Shell subsidiaries” and “Shell companies” as used in this press release refer to companies over which Royal Dutch Shell plc either directly or indirectly has control. Companies over which Shell has joint control are generally referred to “joint ventures” and companies over which Shell has significant influence but neither control nor joint control are referred to as “associates”. In this press release, joint ventures and associates may also be referred to as “equity-accounted investments”. The term “Shell interest” is used for convenience to indicate the direct and/or indirect (for example, through our 23% shareholding in Woodside Petroleum Ltd.) ownership all third-party interest.
This press release contains forward-looking statements concerning the financial condition, results of operations and businesses of Royal Dutch Shell. All statements other than statements of historical fact are, or may be deemed to be, forward-looking statements. Forward-looking statements are statements of future expectations that are based on management’s current expectations and assumptions and involve known and unknown risks and uncertainties that could cause actual results, performance or events to differ materially from those expressed or implied in these statements. Forward-looking statements include, among other things, statements concerning the potential exposure of Royal Dutch Shell to market risks and statements expressing management’s expectations, beliefs, estimates, forecasts, projections and assumptions. These forward-looking statements are identified by their use of terms and phrases such as ‘‘anticipate’’, ‘‘believe’’, ‘‘could’’, ‘‘estimate’’, ‘‘expect’’, ‘‘goals’’, ‘‘intend’’, ‘‘may’’, ‘‘objectives’’, ‘‘outlook’’, ‘‘plan’’, ‘‘probably’’, ‘‘project’’, ‘‘risks’’, “schedule”, ‘‘seek’’, ‘‘should’’, ‘‘target’’, ‘‘will’’ and similar terms and phrases. There are a number of factors that could affect the future operations of Royal Dutch Shell and could cause those results to differ materially from those expressed in the forward-looking statements included in this press release, including (without limitation): (a) price fluctuations in crude oil and natural gas; (b) changes in demand for Shell’s products; (c) currency fluctuations; (d) drilling and production results; (e) reserves estimates; (f) loss of market share and industry competition; (g) environmental and physical risks; (h) risks associated with the identification of suitable potential acquisition properties and targets, and successful negotiation and completion of such transactions; (i) the risk of doing business in developing countries and countries subject to international sanctions; (j) legislative, fiscal and regulatory developments including regulatory measures addressing climate change; (k) economic and financial market conditions in various countries and regions; (l) political risks, including the risks of expropriation and renegotiation of the terms of contracts with governmental entities, delays or advancements in the approval of projects and delays in the reimbursement for shared costs; and (m) changes in trading conditions. All forward-looking statements contained in this press release are expressly qualified in their entirety by the cautionary statements contained or referred to in this section. Readers should not place undue reliance on forward-looking statements. Additional risk factors that may affect future results are contained in Royal Dutch Shell’s 20-F for the year ended December 31, 2013 (available at www.shell.com/investor and www.sec.gov ). These risk factors also expressly qualify all forward looking statements contained in this press release and should be considered by the reader.
Each forward-looking statement speaks only as of the date of this press release, 20 November 2014. Neither Royal Dutch Shell plc nor any of its subsidiaries undertake any obligation to publicly update or revise any forward-looking statement as a result of new information, future events or other information. In light of these risks, results could differ materially from those stated, implied or inferred from the forward-looking statements contained in this press release.
We may have used certain terms, such as resources, in this press release that United States Securities and Exchange Commission (SEC) strictly prohibits us from including in our filings with the SEC. U.S. Investors are urged to consider closely the disclosure in our Form 20-F, File No 1-32575, available on the SEC website www.sec.gov. You can also obtain these forms from the SEC by calling 1-800-SEC-0330.