SolderPlus Dispensing Paste from Nordson EFD Provides a More Reliable, Convenient Solution for RFID Bonding Applications
- Nordson
EFD, a Nordson company (NASDAQ: NDSN),
the world’s leading precision fluid dispensing systems manufacturer,
offers a new SolderPlus®
dispensing paste formula to improve bond reliability in RFID (Radio
Frequency Identification) tags, dual interface (DI) smart cards, and
biometric passports.
These applications require attaching an antenna electrically connected to a chip. Manufacturers often use a silver filled epoxy to bond these components. This method requires a curing process, which can affect bond strength if not enough time is allotted for complete curing. Other process considerations include low storage temperature requirements of minus 32° F (0° C).
The process of applying Nordson EFD solder paste is faster and easier because there is no curing time required. Also, solder paste can be stored at a higher temperature, requiring less time to thaw.
A bending test is often used to determine the lifetime of an RFID card. It simulates what can happen when a card is bent in a wallet to determine at what point electrical disconnection happens.
“The test indicates a SolderPlus bond lasts for more than 20,000 cycles of use,” said Philippe Mysson, Business Development Manager – Solder Paste, Nordson EFD. “That is equivalent to about 10 years in a wallet. Silver filled epoxy bonds last roughly 1,000 cycles or six months.”
In addition, the chemistry of solder paste makes it safer to use when compared to the chemistry of silver filled epoxy, which contains toxic materials. Solder paste is also much less expensive because it contains no silver.
“We believe each of these factors make our specialized formula of EFD SolderPlus dispense paste a more reliable, cost-effective alternative to other methods used in RFID bonding applications,” Mysson said. “The reliability of solder joints is 20 times better than existing standard connections. When paired with faster production time, this allows DI smart card and RFID tag manufacturers to improve the quality and reliability of their product while meeting increasing consumer demand.”
For more information, visit Nordson EFD on the web at http://www.nordson.com/en/divisions/efd/solutions/rfid, facebook.com/NordsonEFD, or linkedin.com/company/nordson-efd, email at [email protected], or call +1 401.431.7000 or 800.556.3484.
About Nordson EFD
Nordson EFD designs and manufactures precision fluid dispensing systems for benchtop assembly processes and automated assembly lines. By enabling manufacturers to apply the same amount of adhesive, lubricant or other assembly fluid to every part, every time, EFD dispensing systems are helping companies in a wide variety of industries increase throughput, improve quality, and lower their production costs. Other fluid management capabilities include high-quality syringe barrels and cartridges for packaging one- and two-component materials, along with a wide variety of fittings, couplers and connectors for controlling fluid flow in medical, biopharmaceutical and industrial environments. The company is also a leading formulator of specialty solder pastes for dispensing and printing applications in the electronics industry.
About Nordson Corporation
Nordson engineers, manufactures, and markets differentiated products and systems used for dispensing and processing adhesives, coatings, polymers, sealants and biomaterials; and for managing fluids, testing and inspecting for quality, treating surfaces and curing. These products are supported with extensive application expertise and direct global sales and service. We serve a wide variety of consumer non-durable, consumer durable and technology end markets including packaging, nonwovens, electronics, medical, appliances, energy, transportation, building and construction, and general product assembly and finishing. Founded in 1954 and headquartered in Westlake, Ohio, the company has operations and support offices in more than 30 countries. Visit Nordson on the web at nordson.com, twitter.com/Nordson_Corp or facebook.com/nordson.
ContactsNordson EFD
&source=" target="_blank" />
Natalie Tomasso, +1-401-431-7173 (USA)
Marketing Communications Specialist
[email protected]
or
Nordson EFD
Global
Natalie Tomasso, +1-401-431-7173
[email protected]
or
Europe
+44 (0) 1582 666334
[email protected]
or
China
+86 (21) 3866 9006
[email protected]
or
Japan
+81 (03) 5762 2760
[email protected]
or
SEAsia
+65 6796 9522
[email protected]
or
India
+91 80 4021 3600
[email protected]
Applying a specialized solder paste formula can improve production
yields while saving time and reducing costs
EAST PROVIDENCE, R.I.–(BUSINESS WIRE)–Nordson
EFD, a Nordson company (NASDAQ: NDSN),
the world’s leading precision fluid dispensing systems manufacturer,
offers a new SolderPlus®
dispensing paste formula to improve bond reliability in RFID (Radio
Frequency Identification) tags, dual interface (DI) smart cards, and
biometric passports.
These applications require attaching an antenna electrically connected
to a chip. Manufacturers often use a silver filled epoxy to bond these
components. This method requires a curing process, which can affect bond
strength if not enough time is allotted for complete curing. Other
process considerations include low storage temperature requirements of
minus 32° F (0° C).
The process of applying Nordson EFD solder
paste is faster and easier because there is no curing time required.
Also, solder paste can be stored at a higher temperature, requiring less
time to thaw.
A bending test is often used to determine the lifetime of an RFID
card. It simulates what can happen when a card is bent in a wallet to
determine at what point electrical disconnection happens.
“The test indicates a SolderPlus bond lasts for more than 20,000 cycles
of use,” said Philippe Mysson, Business Development Manager – Solder
Paste, Nordson EFD. “That is equivalent to about 10 years in a wallet.
Silver filled epoxy bonds last roughly 1,000 cycles or six months.”
In addition, the chemistry of solder paste makes it safer to use when
compared to the chemistry of silver filled epoxy, which contains toxic
materials. Solder paste is also much less expensive because it contains
no silver.
“We believe each of these factors make our specialized formula of EFD
SolderPlus dispense paste a more reliable, cost-effective alternative to
other methods used in RFID bonding applications,” Mysson said. “The
reliability of solder joints is 20 times better than existing standard
connections. When paired with faster production time, this allows DI
smart card and RFID tag manufacturers to improve the quality and
reliability of their product while meeting increasing consumer demand.”
For more information, visit Nordson EFD on the web at http://www.nordson.com/en/divisions/efd/solutions/rfid, facebook.com/NordsonEFD, or
linkedin.com/company/nordson-efd,
email at [email protected],
or call +1 401.431.7000 or 800.556.3484.
About Nordson EFD
Nordson EFD designs and manufactures precision
fluid dispensing systems for benchtop assembly processes and
automated assembly lines. By enabling manufacturers to apply the same
amount of adhesive, lubricant or other assembly fluid to every part,
every time, EFD dispensing systems are helping companies in a wide
variety of industries increase throughput, improve quality, and lower
their production costs. Other fluid management capabilities include
high-quality syringe
barrels and cartridges
for packaging one- and two-component materials, along with a wide
variety of fittings,
couplers and connectors for controlling fluid flow in medical,
biopharmaceutical and industrial environments. The company is also a
leading formulator of specialty solder
pastes for dispensing and printing applications in the electronics
industry.
About Nordson Corporation
Nordson engineers, manufactures, and markets differentiated products and
systems used for dispensing and processing adhesives, coatings,
polymers, sealants and biomaterials; and for managing fluids, testing
and inspecting for quality, treating surfaces and curing. These products
are supported with extensive application expertise and direct global
sales and service. We serve a wide variety of consumer non-durable,
consumer durable and technology end markets including packaging,
nonwovens, electronics, medical, appliances, energy, transportation,
building and construction, and general product assembly and finishing.
Founded in 1954 and headquartered in Westlake, Ohio, the company has
operations and support offices in more than 30 countries. Visit Nordson
on the web at nordson.com,
twitter.com/Nordson_Corp
or facebook.com/nordson.
Contacts
Nordson EFD
Natalie Tomasso, +1-401-431-7173 (USA)
Marketing
Communications Specialist
[email protected]
or
Nordson
EFD
Global
Natalie Tomasso, +1-401-431-7173
[email protected]
or
Europe
+44
(0) 1582 666334
[email protected]
or
China
+86
(21) 3866 9006
[email protected]
or
Japan
+81
(03) 5762 2760
[email protected]
or
SEAsia
+65
6796 9522
[email protected]
or
India
+91
80 4021 3600
[email protected]
.jpg)
