Nordson ASYMTEK Introduces Helios Automated Fluid Dispensing Platform for Medium and Bulk Volume Deposits
Dispenses both single- and two-component materials for
applications in electronics assembly
Spanish translation at: http://files.constantcontact.com/0633e5bd001/b3f2ab4a-4b69-46ed-9c5b-027caa5468f9.pdf
German translation at: http://files.constantcontact.com/0633e5bd001/31d0ad92-a53a-46c4-94ed-9ceee4123110.pdf
CARLSBAD, Calif.–(BUSINESS WIRE)–Nordson
ASYMTEK, a Nordson company (NASDAQ: NDSN)
and global leader in dispensing, jetting, and coating equipment and
technologies, introduces the new Helios™ SD-960 Series Automated
Dispensing System for medium and bulk volume deposits of single- (1K)
and two-component (2K) materials in electronics manufacturing and
printed circuit board assembly. The Helios system is ideal to deposit
volumes greater than 1cc, and line widths and dots that exceed 1mm, but
it can deposit volumes down to 0.3cc and line widths as narrow as 0.3mm.
The system supports highly abrasive thermal interface materials (TIM),
silicones, epoxies, and grease for applications such as potting,
sealing, gasketing, and structural adhesives.
The Helios system was made specifically to accommodate large parts and
substrates. The frame is 200mm taller and the robotics 150mm higher for
more overhead clearance than a standard dispensing platform. An optional
bulk fluid hose enclosure can provide added vertical clearance for
securely routing remote bulk-feed hoses and to accommodate larger valves
and mixers. There are two conveyor options, standard chain or
double-wide chain. A large purge container holds volumes up to 2 liters.
The Helios system can be equipped with Nordson ASYMTEK dispense valves
or Nordson 1k- or 2k-metering systems. When used with metering systems,
the controls can be integrated so that the operator sees the metering
system’s monitor from the same position as the machine control. This
allows the operator to focus on the dispensing area during operation.
The Helios system comes with Nordson ASYMTEK’s Fluidmove®
software, providing dispense programming control in a familiar Windows®
environment. Closed-loop controls maintain unparalleled control and
accuracy of the dispensing process. An optional needle sensor is
available to monitor the positioning of large needles that deliver bulk
amounts and a laser height sensor automatically calibrates for substrate
height. A camera system enables programming and fiducial recognition,
and an optional large-capacity, integrated weight scale provides Mass
Flow Calibration to ensure that dispense volumes remain within defined
process limits through weight-controlled dispensing and automatic
calibration.
The Helios system accommodates a variety of bulk fluid supply options.
Various size reservoirs, fluid regulators, booster pumps, level sensors,
and more can be selected to fit the specific fluid and application
requirements.
“The Helios SD-960 Series was developed by combining Nordson ASYMTEK’s
30+ years’ of expertise in micro-dispensing with the bulk and
2-component dispensing experience of other Nordson divisions,” explained
Almar Thewissen, product manager, Nordson ASYMTEK. “The result is a
complete process solution for medium- to large-volume dispensing
applications in electronics assembly.”
For more information contact Nordson ASYMTEK at [email protected],
call +1 760-431-1919, or visit our website: www.nordsonasymtek.com.
About Nordson ASYMTEK
Nordson
ASYMTEK, a world leader in precision fluid dispensing, conformal
coating, and jetting technologies, designs and manufactures dispensing
and coating systems, supported by an award-winning global applications
and service network for over 30 years. To find out more, visit www.NordsonASYMTEK.com,
or on social media.
About Nordson Corporation
Nordson Corporation engineers, manufactures and markets differentiated
products and systems that dispense, apply and control adhesives, coatings, polymers, sealants, biomaterials,
and other fluids, test
and inspect for quality, and treat
and cure surfaces, and are supported by application expertise and
direct global sales and service. Nordson serves many consumer
non-durable, durable and technology end-markets including packaging,
nonwovens, electronics, medical, appliances, energy, transportation,
construction, and general product assembly and finishing. Founded in
1954, headquartered in Westlake, Ohio, Nordson has operations and
support offices in nearly 40 countries. Visit Nordson at www.nordson.com, Twitter
or Facebook.
Contacts
Nordson ASYMTEK:
Roberta Foster-Smith, +1.760.431.1919
[email protected]
or
Agency:
AR
Marketing, Inc.
Andrea Roberts, +1.858.204.9584
[email protected]
or
International
Offices:
Headquarters, Carlsbad, CA: +1.760.431.1919 www.nordsonasymtek.com
China:
+86.21.3866.9166 www.nordsonasymtek.com/cn
Europe:
+31.43.352.4466
India: +91.44.4353.9024
Japan: +81.0120.537.555
Korea:
+82.31.765.8337
Southeast Asia: +65.6796.9515
Taiwan:
+886.2.2902.1860
.jpg)
