New ASTM International Standard Establishes Performance Requirements for Butanol for Use as Automotive Engine Fuel

W. CONSHOHOCKEN, Pa., September 27, 2013—Butanol shows strong potential to be used as a biofuel. Now, a new ASTM International standard covers butanol that is intended to be blended with gasoline at 1 to 12.5 volume percent for use as an automotive spark-ignition engine fuel. ASTM D7862-13, Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel, was developed by Subcommittee D02.A0 on Gasoline and Oxygenated Fuels, part of ASTM International Committee D02 on Petroleum Products, Liquid Fuels and Lubricants.

ASTM D7862 establishes performance requirements and test methods for butanol content, water content, acidity, inorganic chloride, solvent-washed gum, sulfur content and total sulfate.

“The new ASTM standard for butanol will further commercialization of a new renewable fuel, and provide a fuel quality standard to govern the production and marketing of butanol,” says Glenn Johnston, executive vice president, regulatory affairs, Gevo Inc., and a D02 member.

Johnston says that butanol has several benefits as a blending agent in gasoline. Butanol is compatible with existing vehicles and refueling infrastructure, and it also offers a high blending value due to its low vapor pressure, high octane number and favorable distillation properties.t

The ASTM D7862 specification will be used by biofuel producers, petroleum refiners, gasoline blenders, government agencies, inspection laboratories, and manufacturers of motor vehicles, marine engines and outdoor power equipment.

Johnston encourages all interested parties to join in the standards developing activities of D02.A0. The subcommittee next plans to develop a proposed standard on the use of butanol in flexible fuel vehicles.

To purchase ASTM standards, visit www.astm.org and search by the standard designation, or contact ASTM Customer Relations (phone: 877-909-ASTM; [email protected]). ASTM International welcomes participation in the development of its standards. For more information on becoming an ASTM member, visit www.astm.org/JOIN.

ASTM International is one of the largest international standards development and delivery systems in the world. ASTM International meets the World Trade Organization (WTO) principles for the development of international standards: coherence, consensus, development dimension, effectiveness, impartiality, openness, relevance and transparency. ASTM standards are accepted and used in research and development, product testing, quality systems and commercial transactions.

For more news in this sector, visit www.astm.org/sn-energy or follow us on Twitter @ASTMEnergy.

ASTM Committee D02 Next Meeting: Dec. 8-12, 2013, Tampa, Fla.
Technical Contact: Glenn Johnston, Gevo Inc., Englewood, Colo., Phone: 720-267-8600; [email protected]
ASTM Staff Contact: David Bradley, Phone: 610-832-9681; [email protected]
ASTM PR Contact: Barbara Schindler, Phone: 610-832-9603; [email protected]